Home » Here’s Why My Diesel Manual Chrysler Voyager Failed Germany’s Ridiculously-Strict TÜV Inspection. Again.

Here’s Why My Diesel Manual Chrysler Voyager Failed Germany’s Ridiculously-Strict TÜV Inspection. Again.

Screen Shot 2022 07 26 At 8.12.19 Pm

Germany’s TÜV inspection is one of the toughest vehicle safety inspections in the world, and my 260,000 mile diesel, manual Chrysler Voyager Minivan has been getting its ass kicked by it since 2020. It was then that I went through the inspection three times before finally making it through; with that under my belt, I was certain the vehicle would pass all subsequent TÜV inspections for years to come. I was wrong. Just today, the van failed; here’s why.

My biggest worry with Germany’s TÜV inspection is that technicians sometimes don’t know the ins and outs of all the cars they’re dealing with. That may seem like someone venting their frustrations, but it’s not — it’s acknowledged as a major problem by the “Oldtimer” car community here in Germany. Take two of the reasons why my 1994 Chrysler Voyager failed its inspection back in 2020 (see below): The rear brakes were considered too weak and the steering column wasn’t locking properly.

Vidframe Min Top
Vidframe Min Bottom

Neither of these were actual issues. The steering lock was just behaving in a way that the inspector didn’t understand (the inspector wasn’t used to there being a separate “off” and “lock” position), and the rear brakes were in perfect shape. I later called The Chrysler Voyager King of Germany, Tizian, who told me that all of his Voyagers tended to fail TÜV due to the inspectors’ scorecards containing overly optimistic target values for rear braking force.

Screen Shot 2022 07 26 At 7.23.10 Pm Screen Shot 2022 07 26 At 7.23.27 Pm

ADVERTISEMENT
Ad Placeholder Wide Top Banner

Luckily, this time around, my inspector didn’t fail the van for the weak brakes or an ignition he wasn’t used to or anything like that, though he did find some things

Screen Shot 2022 07 26 At 8.30.58 Pm

First, the inspector claims the headlights are too dim; he’s not wrong that they’re dim, but Chrysler headlights from this era just were dim. My van’s bulbs are new, the wiring has been replaced, and the light looks about as bright as what I’m used to in 1990s-era Chrysler products. I know he’s got target light output values that my van needs to hit, but any inspector used to dealing with 1990s Chryslers would say “Yeah, these suck, but that’s just how these things are.”

Screen Shot 2022 07 26 At 8.33.15 Pm

Actually, looking at that photo, maybe he’s got a point. Those really, really suck.

ADVERTISEMENT
Ad Placeholder Wide Top Banner

Second, my inspector discovered grease leaking from an outer CV boot that I had replaced. He’s totally right on this one, though I do think he’s being a bit picky. The boot is new, and it’s not cracked; it appears that the clamp is a little loose, and a bit of grease has oozed out. Could this affect braking performance theoretically? If it somehow gets to the brake pad or disk. I don’t expect that it will; still, this should be an easy fix — just tighten the clamp, and boom: done.

Screen Shot 2022 07 26 At 8.23.20 Pm

The problem is that the headlight fix will not be easy. In fact, I’m really worried about it. Euro-spec headlights for a Chrysler Voyager (they’re mounted differently than U.S.-spec headlights, which weren’t required to have a leveling feature to keep the lights down when the vehicle’s rear was loaded, plus the beam pattern is a bit different) are basically unobtainium. Here’s a single New Old Stock for $330:

Screen Shot 2022 07 26 At 7.55.55 Pm

Used ones are often listed at over $100, and they’re probably in no better shape than the ones in my vehicle:

ADVERTISEMENT
Ad Placeholder Wide Top Banner

Screen Shot 2022 07 26 At 8.14.10 Pm

Screen Shot 2022 07 26 At 8.48.52 Pm

So what’s the solution? I don’t know yet. I’ve purchased some better bulbs than the crappy gas station ones I’d snagged for 5 Euros, and I have a lens restoration kit, which I hope will allow more light through:

20220726 202644

But I don’t think these two are going to be enough, and I don’t know what other options I have. Looking in my engine bay, it appears based on the paired relays near each headlight that someone already installed a headlight booster kit (which, if I understand it correctly, allows for a more direct path from the battery to each bulb to maximize brightness). Here’s how a booster kit looks:

ADVERTISEMENT
Ad Placeholder Wide Top Banner

Screen Shot 2022 07 26 At 8.09.28 Pm

And here’s the setup in my car (yeah, I know, it’s a rat’s nest. The previous owner was messy with wiring):

20220726 202723 Screen Shot 2022 07 26 At 8.31.43 Pm

So if the wiring is okay, the bulb is good, and I can’t afford new headlight housings, then what’s the solution? I really don’t know yet, though the aforementioned Chrysler Voyager King of Germany suggested I send my headlight housings out to be restored. There are services like “Reflektorklinik.de” in Germany that will re-coat the reflectors in the headlight housings for about $60 a pop, though I’d have to carefully remove the lenses using heat; check it out:

Screen Shot 2022 07 26 At 8.35.48 Pm Screen Shot 2022 07 26 At 8.35.37 Pm

ADVERTISEMENT
Ad Placeholder Wide Top Banner

Here’s a look at my Voyager’s reflector situation; you can see how some of the reflective coating has faded away, and black plastic is showing through:

Screen Shot 2022 07 26 At 8.42.37 Pm

Who knows; maybe the new bulbs and the lens cleaning kit will get me over the hump. I sure hope so. Tighten the clamp, squeeze out a few more lumens from those headlights, and I should be good. Screen Shot 2022 07 26 At 8.50.53 Pm

In all honestly, this inspection could have been so much worse. A few months ago, as my dad was driving the van, the thing just shut off. After a bit of diagnosis, I learned that the problem was that the engine computer wasn’t sending a steady signal to the fuel shutoff solenoid valve, meaning the valve would close and shut the engine off. The output from the computer appeared to be eight volts, which seemed low to me, so I just used it to trigger a relay, which sent 12 volts to the solenoid to allow fuel flow. This didn’t work either — at least, not under heavy acceleration, as the signal seemed to cycle the relay and shut off the fuel intermittently. During low pedal applications, it worked fine.

Screen Shot 2022 07 26 At 8.59.26 Pm

ADVERTISEMENT
Ad Placeholder Wide Top Banner

I fixed this by bypassing the engine computer, so that — instead of the engine computer triggering the relay to send 12 volts to the fuel valve — the ignition switch did the triggering. I actually used the underhood OBD connector (see above) — which feeds 12 volts to the OBD reader when the ignition is on — as the source for the relay trigger (I also wired in a cutoff safety switch in the cabin, hence the two relays below). Now the van works great (though the computer can no longer shut the car off to protect itself — hence the safety switch), though even the inspector mentioned that he wasn’t thrilled to see this wiring situation:Screen Shot 2022 07 26 At 9.00.40 Pm

Still, he gave me a pass, his CV boot assessment is technically correct, and he’s not wrong that my headlights are dim, so overall, this time around wasn’t too bad. Though getting these lights bright enough may be a bigger job than I’d like.

 

 

 

ADVERTISEMENT
Ad Placeholder Wide Top Banner
Facebook
WhatsApp
Twitter
LinkedIn
Reddit
156 Comments
Inline Feedbacks
View all comments
OptionXIII
OptionXIII
2 years ago

I think that “booster kit” looks suspect. Sure, the reflectors aren’t ideal, but the bulb glow is distinctly yellow. Replating the interiors, plus a lens cleanup, plus cheap high wattage Hella bulbs could work. As others have said though, ask your Van King if there is a sealed beam mount compatible with the Euro height adjustable mounts that you could put some E-code H4 reflector lenses in. I’d like to think a well built custom sealed beam replacement setup would pass inspection, but I somehow doubt they’d let you get away with a homebrew solution.

Lens removal can be done in the oven. Just be careful with the temperature and how long they are in there. More even heating is more better. Reseal with butyl rubber – plenty of kits sold for it in the States.

Halftrack El Camino
Halftrack El Camino
2 years ago
Reply to  OptionXIII

I’d be worried about throwing high-wattage bulbs in that thing, the wiring and light housings were never designed for that and whatever safety margin Chrysler’s engineers built in is probably long gone just from age and neglect.

rootwyrm
rootwyrm
2 years ago

As a reminder: Japanese Shaken is literally a hundred times harder than TUV. Minimum.
David’s Voyager would be deemed permanently unsafe under Shaken due to having corrosion on suspension components. Not rust-through. Just surface corrosion.

Anyway.
The CV boot callout is correct, because he’s not calling out the grease – he’s calling out the grease impeding ABS operation. That is a safety issue, full stop. Fix boot, brake clean the shit out of the ABS sensor and tone wheel, all good.

Same for the headlights. That’s not just “Chrysler suck” that’s “completely fucking trashed.” Sealed beams are of course, no bueno. But those things are so trashed inside and out that frankly, your only option here is a new housing. Replating it – even if it did take (very unlikely) – won’t help. Because they’ll never seal back up fully, and the lenses are shot. At which point you’re already going to be spending more than it costs for a replacement assembly.
No, seriously. You need a proper heat gun, that’ll be $50-60. Then you’ll need the special sealant – RTV is NOT an acceptable substitute and never has been. The correct stuff is NOT cheap – it’s 3M black butyl rubber ribbon sealer. You’ll be spending at least $60 for sufficient quantity to do both assemblies. (People will claim the original stuff is reusable. IT IS NOT. Once it’s spent more than a few days cured, that’s IT.)

The ASD shutoff is MUCH more concerning, but somewhat easier to fix. You need to find an electronics repair place that does component repairs. Take them the PCM, there’s likely a leaking capacitor or burnt resistor in it. That’s why you need to do it ASAP. Leaking capacitors WILL destroy the entire PCM leading to a much, much more costly repair. Hopefully it’s just a cold solder joint, which just means basic rework. But these are also very prone to failed capacitors at this age.
“Ich glaube, es gibt einen undichten/ausgefallen Kondensator.”

rootwyrm
rootwyrm
2 years ago
Reply to  David Tracy

Check the xref, because I do believe that the Euro spec headlight assemblies are no different from the US spec. But check the xref, because I could be entirely wrong. But if they’re plastic lens and not glass, I’m like 99% certain they’re the same. In which case you can use LKQ CH2518104V and CH2519104V, which are about $80 each.

EricTheViking
EricTheViking
2 years ago
Reply to  rootwyrm

Both US and ECE headlamps have completely different outputs and designs.

The US headlamp bulbs have the transverse filaments while ECE has longitudinal filaments. The US optic diffusing flutes on the lens are vertical while ECE has the portion (usually lower half and to the left half on the LHD vehicles) that are diagonal resembling almost a half bow tie (more explanation below). In 1991, US finally allowed the ECE headlamps and insisted on HB2 (its name for H4) be built to the tighter tolerance than crappy transverse-filamented HB bulbs.

The US allows the light output to be higher into the sky as to illuminate the unlit overhead signage and the signage on the left side of road (more and more signage on the highways and roads have been gradually moved to the right side of road in the last thirty years). That’s why they are bitch during the fog, heavy rain, snow, and inclement weather and higher degree of glare, especially toward the approaching drivers. This might explain why the HID headlamps for the US have massively obnoxious glare .ECE has a sharp horizontal cut-off from left to middle then cast upward from middle to right (as to illuminate the road signage).

The US headlamps have to have both lens and housing (that includes reflectors) sealed while ECE allows both to be taken apart for the cheaper lens replacements that are damaged by collision. Sometimes, the manufacturers save money by gluing them together instead of using the clamps. This also gives the manufacturers more incentive to sell the whole headlamp units instead of parts.

Lastly, US no longer allows the horizontal adjustment (they were permanently set at the factory), and ECE allows both horizontal and vertical adjustment. ECE mandates either manual or automatic headlamp aim while compensating for the heavier load in the rear.

This answers your question, no?

Janek PL
Janek PL
2 years ago
Reply to  David Tracy

Hi David! You can buy brand new headlights reaplacements by Polish eBay-like site allegro.pl for 99 zloty which would be about 25$ apiece if the seller agrees shipping to germany. Here is link:

https://allegro.pl/oferta/reflektor-lewy-prawy-chrysler-voyager-91-95-11280601487
description says that seller has left and right headlight in same price.

Good luck in keeping that van on the road!

I am using for four years now an old – 1997 Ford Transit van with 2,5 TDI engine as a campervan, it is slow and noisy, but gets pretty low fuel consumption. Each year it gets harder to find cheap parts, but I think it is still easier to get them in Poland than Germany, cause of higher average age of cars on our roads 😉

dblues48
dblues48
2 years ago
Reply to  rootwyrm

Yep – shaken is def no joke. Spent a couple of summers in Japan a number of years ago. We’d been there for a few days when we noticed the complete lack of cars more than a very few years old. When it gets too expensive to pass shaken, it goes in the crusher. 5-6 years was about all when I was there.

nlpnt
nlpnt
2 years ago
Reply to  dblues48

Crusher, not so much at least not anymore. There’s a big market for used JDM Japanese cars, not just the special ones, in places like western Russia, New Zealand and Micronesia.

samfinnz
samfinnz
2 years ago
Reply to  nlpnt

Yup, we were massive beneficiaries of Shaken requirements in the mid to late 1990s, when New Zealand lifted all vehicle import tariffs and JDM cars flooded in. The average age of our fleet dropped very hard (although it’s now been steadily rising again because 1990s Japanese cars refuse to die).

Jamanred
Jamanred
2 years ago

Mother’s had a good headlight restoration kit that will last you through multiple vehicles at ~$30. I have done at least 6 vehicles on the same sandpaper pads it came with. I would also consider LED bulb replacement at 5400k (white with a little yellow) to 6000k (pure white) or an HID conversion..if they are looking at a lumen rating to hit for their inspection. Yes the refracted housing will throw some shadows but increase the light on the road substantially and at a lower wattage with no damage to the light enclosures. You can rip out that booster thingy all together. $30 for LED bulbs and $30 for the restoration kit (look for the drill version as the one with out will give you a serious workout).

Brummbaer
Brummbaer
2 years ago

Many respondents are suggesting different bulbs, coatings, etc. These American “solutions” are probably moot. From my experience in Germany most American “enhancements” are specifically forbidden by law. Get a 500 euro fine and possible empoundment

rootwyrm
rootwyrm
2 years ago
Reply to  Brummbaer

Very much this. The US, particularly DOT, is a total joke. Every aftermarket and OE headlight is ‘self-certified’ which amounts to them saying ‘we totally promise it’s compliant, even though we didn’t test anything.’ Direct result is that 90% of aftermarket parts from Dorman are so super totally illegal everywhere it’s not even funny. But since there’s no real consequences besides maybe a meaningless and impossible to enforce recall and a few thousand dollars of fines, they just keep doing it.

Vinc
Vinc
2 years ago

Crazy thought but… couldn’t it be an issue with the aftermarket headlight booster kit? Maybe worth checking to see what happens if the kit is removed before messing with the lights?

toonman13
toonman13
2 years ago
Reply to  Vinc

Those lenses and reflectors definitely need some attention, but I certainly wouldn’t rule out the booster kit.

TxJeepGuy
TxJeepGuy
2 years ago

I was gonna suggest the piggyback harness… used it on a few XJ’s now and it makes a huge difference.

Man With A Reliable Jeep
Man With A Reliable Jeep
2 years ago

I’m probably all kinds of wrong to suggest it, but I know KC makes the pigtails for conversion to H4 lamps and those sweet, sweet Hella glass housings for my JK. I’d imagine there’s got to be a conversion kit for your van, although I’m sure the glass housings aren’t cheap (if they exist). All I know is the light is a lot better after my H4 conversion.

Wesley
Wesley
2 years ago

Based on the headlights and the fuel pump, it sounds like your electrical supply is weak – check the grounds, and a new alternator and battery may be in order?

rootwyrm
rootwyrm
2 years ago
Reply to  Wesley

Nope. Electrical supply is fine. If he had LV system problems, the power windows would not work and the IPC would have ‘twitching.’ The headlights on these will dim under any moderate electrical load.

Source: I fixed electrical on more of these than you can find at Carlisle. If there was a supply problem, I would’ve already said.

Wesley
Wesley
2 years ago
Reply to  rootwyrm

I stand corrected.

Mr.Asa
Mr.Asa
2 years ago

Every time I see the lead photo chosen for this article, I can’t help but think of a photo of a pregnancy result.
Has the same energy.

Sid Bridge
Sid Bridge
2 years ago

This is an easy fix. Go back to the inspector once you’ve tightened the CV boot. The rest is all in your acting skills. Follow closely here… this is genius….

Stand in front of the car, looking intently at the headlights as the inspector flips the switch. As soon as those headlights go on, cover your eyes wildly with both arms and shout “OH MY GOD I’M BLIND!!”

Should get you an immediate pass.

nycbjr
nycbjr
2 years ago

My dad refurbished a euro spec headlight housings for a Mercedes 560sl, he cleaned them really good then used reflective tape, then sprayed them with reflective paint, turned out real good, lot cheaper than $120!

endusone
endusone
2 years ago

Suggestion: A series of articles in which David Tracy attempts to buy and legally drive a shitbox on every continent. Antarctica will either be really easy or really hard, depending on how you look at it.

CSRoad
CSRoad
2 years ago

Well they don’t allow H4 LED conversions I imagine, so the best legal solution is the Silvania SilverStar Ultra 9003/H4. You can source them in pairs at Walmart or on Amazon or other places.
They have reduced life compared to the regular SilverStar, so plan on that. [Blade Runner reference deleted.]

I carry a spare at all times on my on my old Honda motorcycle, but it is worth it, noticeably whiter and brighter than the stock Stanley H4 in that application.

Data
Data
2 years ago
Reply to  CSRoad

In another thread, David said he was not aware of Blade Runner or Aliens. I find this hard to believe. I can now hear Roy telling Tyrell he wants more life.

rootwyrm
rootwyrm
2 years ago
Reply to  CSRoad

An LED conversion can be legal but requires it be built and certified through actual testing and evaluation. Unlike the US where you just slap the ‘we said it’s ok’ sticker on it, because DOT will never inspect it.

SilverStars are good stuff, but, they’re also currently over $60 a pair.

EricTheViking
EricTheViking
2 years ago
Reply to  CSRoad

If the bulbs are certified and approved for the road use by Kraftfahrt-Bundesamt, then they are allowed. Kraftfahr-Bundesamt (KBA) is the federal agency responsible for evaluating, certifying, and approving the motor vehicles, OEM and aftermarket parts, accessories, and likes.

Recently, Philips and Osram have released the LED replacement bulbs for H4 and H7 headlamps, which are legal in Germany WITH CAVEATS(!). You can’t simply pop them in any H4 and H7 headlamps and call it day (or night). Philips and Osram have to test EACH AND EVERY vehicles with H4 and H7 headlamps as to ensure that the LED bulbs are within the perimeters of halogen H4 and H7 bulbs. So far, they have released about 20 or so vehicles that are approved for LED replacement bulbs.

Vehicles approved for LED replacement bulbs:
https://www.osram.de/am/night-breaker-led/index.jsp?mkt=/night-breaker-led/
https://www.philips.de/c-e/au/autolampen/scheinwerfer/led-compatibility-list.html

The owners who have installed the LED bulbs must print out the certificate of approval (Allgemeinen Bauartgenehmigung (ABG)) to put in the glove compartment. Depending on some vehicles, the owners must install the spacers between the bulbs and sockets.

Icouldntfindaclevername
Icouldntfindaclevername
2 years ago

Why did you install yellow bulbs in you head light? LOL
Yeah, clean the lenses and buy better bulbs, and might wanna try Bosch bulbs

Nottom
Nottom
2 years ago

Not sure if the car’s wiring is up to this, but you can get higher wattage H4’s “for off road use only”, but that may not help much if the reflectors aren’t reflecting.

TOSSABL
TOSSABL
2 years ago
Reply to  Nottom

The 80w ‘off-road’ H4s should pass you. Not terribly pricey, either.

And, there’s an article idea for you: a dive into what goes into lighting design, and why the affordable aftermarket crap is just that

Rollin Hand
Rollin Hand
2 years ago

Yep, the old bulbs are dim. And from the picture, it almost looks like those lights have a larger issue of getting enough power.

Hopefully the Turtle Wax kit helps. Any vid I have seen where that stuff got used was impressive as hell.

I am nervous about those Night Breakers. The blue coating actually lets less light out, while making it harsher. If it works, great. If not, try a high power bulb that doesn’t use the blue.

http://www.danielsternlighting.com/tech/bulbs/blue/good/good.html

Admittedly, this looks at things from a US perspective, but still useful info.

Halftrack El Camino
Halftrack El Camino
2 years ago
Reply to  Rollin Hand

Night Breakers are good, I use them to mitigate the factory-spec shittiness of my Subaru’s headlights. They’re genuinely a bit brighter than normal; the trade-off, since they have to use the same amount of power, is that they also burn out faster.

Rollin Hand
Rollin Hand
2 years ago

But are they truly brighter? Or just harsher? I saw a test done by a tuning magazine (can’t) find the link) a few years back where they tried all sorts of bulbs, and the stockers won in terms of light output over every blue-coated one they tried.

Now if you get brighter bulbs without the blue coating….

Brummbaer
Brummbaer
2 years ago

Having lived with TUV for over 18 years, I don’t want to burst your bubble, but they are doing exactly what they have been mandated to do. Ensure that every vehicle performs to the standard currently required for their safe operation on the roads of Germany. Doesn’t matter when your vehicle was built or what standards it was built under. German rules say “x” amount of light in such and such place, so if your system can’t manage it, it is on you to make it so.

To our American sense of fair play this may seem arbitrary and capricious but that matters not one whit to German law. Sorry, TUV says your vehicle is junk just like tens of thousands of other German vehicle that are rejected every year and has no place on the road.

And let’s be honest David, you know well that you just bodged your way through your last inspection. Black spray paint may be a repair in Michigan, but for TUV it is just lipstick on a pig. Hammering a heated widget into an approximation of what it used to be and painting it is not a safe reliable repair.

If you want to repair your lights the way TUV expects you to, you bite the bullet and buy the expensive replacement lights and do the job properly. Otherwise, you’re just trying to game the system.

mrcanoehead
mrcanoehead
2 years ago
Reply to  Brummbaer

Nobody wants to read, “TUV said my headlights were too dim, so I forked out 600 Euros for NOS headlights”…..

Rollin Hand
Rollin Hand
2 years ago
Reply to  Brummbaer

And, to be blunt, with the Autobahn having no speed limit in places, you WANT this kind of rigorous standard. If you’re going to go out and get what you’ve got, all of the items that cN impact the safety of the ride had best be up to snuff.

And some shitboxes deserve to be off the road.

endusone
endusone
2 years ago
Reply to  Brummbaer

From a quick look there does not appear to be amazingly great data on what percentage of accidents are attributable to mechanical failures but what there is suggests that its around 2% in the US. Of those, tires are the most common cause, brakes second.

I don’t think its a conclusive exoneration of allowing any old shitbox on the road, but it also doesn’t suggest that meticulous inspections of every possible detail are necessary either. I’d rather see the US spend its time trying to teach people to drive properly.

Brummbaer
Brummbaer
2 years ago
Reply to  endusone

And when it comes to licensing, a quick look at the German system shows that few are more demanding both in skill, technical knowledge, and traffic/road theory than the Germans.

CoolDave
CoolDave
2 years ago
Reply to  endusone

God some better drivers education would go so far..

I moved from Australia to the US, I already had a well-earned drivers license but I had to take the typical tests to get a US license anyway. That consisted of 8 hours of drivers education and then the test at the DMV. The entire test was spent with the instructor talking to me about Australia rather than actually, you know, evaluating my driving. But my absolute favorite part was the reverse parallel park.. “the two yellow cones represent other cars, you can touch them but you can’t knock them over” ..wait, I can hit other cars as long as nobody can tell I did it? Awesome. Just awesome.

RodMillington
RodMillington
2 years ago
Reply to  CoolDave

Did the same thing when I moved here in 2014. Written test, one day of classroom education and a driving test. Except my instructor didn’t say a single word outside of directing me what to do the entire time. It was very uncomfortable. He also made me reverse park in front of a driveway with no car behind me stopping how far backwards I could go.

mabus
mabus
2 years ago
Reply to  CoolDave

Got my first license back in bad old 90s in the state of Illinois. Of course I was nervous taking the road test, but the only ding I was given was for making too wide of a right turn. The parallel parking was no problemo though. My dad had to frequently parallel park in Wheaton and Naperthrill (although some still called it Naperville back then) during that decade, so I had a pretty good feel for how it was done and my dad did make me practice the shit outta that before taking me to the DMV.

mr.choppers
mr.choppers
2 years ago
Reply to  endusone

When people have to spend so much $$$ to keep their cars plated, they seem to take driving more seriously as well. Or something.

Space
Space
2 years ago
Reply to  endusone

Thank you this needs to be said, outside of tires and brakes mechanical failures are extremely unlikely to be the cause of a crash.

What’s left out by these safety inspection pushers is the cost of these strict inspections outweigh the benefits. There is the cost of the inspection and the Lost time for everyone involved, and the cost to the environment for otherwise perfectly usable cars having to be replaced with new cars.

FUKENGRUVEN
FUKENGRUVEN
2 years ago
Reply to  David Tracy

You left the clamp loose on the cv boot. That’s meticulous?

Rich Mason
Rich Mason
2 years ago
Reply to  David Tracy

DT, maybe the next time you face this shit there may be a way around this. Can you import a US spec set of lights and grill? With cheap clear new lenses? Just a thought. When I was a kid we would bring the hottest girl willing to tag along at the I inspection process in our tiny Colorado town. A bra less tank top and tight bell bottom jeans, or cut offs always did the trick. You would not believe the crap he missed when his brain was focused on the hot 17 sweet thing standing 3 feet away. I once heard there are lots of hot girls in Krautland..

Lennart Rau
Lennart Rau
2 years ago
Reply to  Rich Mason

No, you cant import US Headlights and use them, that is an immediate fail in a TÜV Prüfung, in fact its one of the first things you have to do if you to import a car from the US – Change the entire lighting system to a European Style one that is TÜV approved. And if you want to own a car, that as never been sold in Germany or anywhere else in the EU, you need to pay them A LOT extra to check if the lights pass the technical requirements. Lights are no joke in Germany, you have to be very careful. Even headlight cleaning and polishing kits are VERBOTEN in theory, because they might alter the lighting system and deflect light in a wrong way and dont think that you can install after market LED lights anywhere. Only unaltered E-numbered headlights fly here.

Halftrack El Camino
Halftrack El Camino
2 years ago
Reply to  David Tracy

“The van has now driven 12,000 miles without a single issue!”
— David Tracy

“A few months ago, as my dad was driving the van, the thing just shut off.” — David Tracy

Truck Gunnhammer
Truck Gunnhammer
2 years ago
Reply to  David Tracy

Wow, and here I thought you just went to Turkey! I didn’t realize you road tripped all the way to de Nile!

Anoos
Anoos
2 years ago
Reply to  David Tracy

All of that work got you a year of use out of a car that smells like someone else’s kids’ Cheerios farts.

Lennart Rau
Lennart Rau
2 years ago
Reply to  David Tracy

Be careful using the headlight polishing kit. If I am not mistaken – those are theoretically illegal to use, because you might alter the lens and deflect light in a wrong way. That being said, I used them, just dont tell anyone. Say you got different used ones at a junkyard.

RallyDarkstrike
RallyDarkstrike
2 years ago
Reply to  Brummbaer

But does that mean they never want things like classic cars on the road? Like….if they have to meet current modern standards, how does one get something like a ’70s BMW to pass? 0_o

unclesam
unclesam
2 years ago

I love plenty of old cars, but honestly I don’t know that I do want something that isn’t up to current standards on the road. I certainly don’t want to drive on public roads in a car without an airbag or insufficient lights.

renewingmind
renewingmind
2 years ago
Reply to  unclesam

I get that, but many (most?) of us feel differently. I drive a 99 M3, and the lights are AWFUL. But they are what they are and the car is worth it to me. I’ve spent most of my life driving a car without an airbag, and I don’t think twice about doing it now.

The only time I’ve ever felt unsafe in a car due to its equipment was riding in a Morris Minor that did not have seat belts (ok, and every time I’ve ridden in a VW bug).

Anoos
Anoos
2 years ago
Reply to  unclesam

I’m getting older and other drivers seem to be getting less attentive. Years ago, I never thought twice about safety features. Sadly, now I’d be a bit nervous without them.

Anoos
Anoos
2 years ago
Reply to  David Tracy

The perfectly reliable car has stranded your dad, is only outputting 67% of the voltage it’s supposed to from the computer that runs the engine and you have a zip-tie and tape ‘solution’ that is just going to be the first of many without finding and fixing the actual problem.

That’s not even taking into account that your headlights have turned French.

The value in some vehicles lies only in their practicality / reliability. I would say that this minivan is one of those vehicles and that it’s completely devoid of reliability (since it can’t be driven on the road and such).

Anoos
Anoos
2 years ago
Reply to  David Tracy

I think you’re also dismissing the amount of work done before that 12k miles.

Everyone here is irrational about cars. That’s fine as long as we don’t get delusional about them. (Even then, it’s still pretty much fine until there’s a transmission in the dishwasher.)

cal67
cal67
2 years ago
Reply to  Anoos

My wife drew the line at a carburetor leaking gas onto the kitchen table. Now I didn’t put it there myself, my brother-in-law did, but guilt by association. I can’t actually blame her for that one, I wasn’t thrilled either.

Anoos
Anoos
2 years ago
Reply to  cal67

Mine has been very understanding. I did the bodywork and then painted my 240sx in the attached 1-car garage below our townhouse. I did it with a roller (thin coat, let it dry then wet sand x 10). It happened over the course of a month and our living space stank of mineral spirits the entire time. She also let me get away with flying 3000 miles away to buy a Miata without telling her.

I guess she’s an automotive enabler.

JDE
JDE
2 years ago
Reply to  David Tracy

could you not just swap the Halogen bulbs with LED? they are not sealed beam head lights are they?

TheCrank
TheCrank
2 years ago

There’s always the option of a folded $100 bill accidentally mixed into your paperwork given to the inspector. That’s worth like a 101 Euros now, great deal!

I’m kidding (Mostly).

Anti Autopian
Anti Autopian
2 years ago
Reply to  TheCrank

And here come the polizei!

UncouthSloth
UncouthSloth
2 years ago
Reply to  Anti Autopian

Crikey! It’s the rozzers!

zeppelopod
zeppelopod
2 years ago
Reply to  TheCrank

DT: “Perhaps our ambassador, Mr. Benjamin Franklin, can help persuade you-”

TMV rep: “NEIN!”

DT: “Are you kidding? I could buy a whole ‘nother car for that!”

chi_spotting
chi_spotting
2 years ago
Reply to  zeppelopod

I’m framing this comment on my wall.

zeppelopod
zeppelopod
2 years ago
Reply to  chi_spotting

please fix my typo to “TMV” –> “TÜV” when you do :/

eggsalad
eggsalad
2 years ago

You live in Michigan, David. Go to the SoS office with the title, obtain a plate, and mail it to Germany. No TUV necessary if you’re on a Michigan registration.

nlpnt
nlpnt
2 years ago
Reply to  eggsalad

I’d expect that would mean his dad wouldn’t have (legal) use of it in that case, although whether he’d get away with driving it anyway would depend on things like whether or not he’s still active duty or retired (either way probably wouldn’t get past the base guardhouse like that, just a matter of how often he goes there/out).

Autojunkie
Autojunkie
2 years ago
Reply to  eggsalad

Considering the van is over 25 years old, that just might work.

mrcanoehead
mrcanoehead
2 years ago
Reply to  eggsalad

You’d need to get out of country insurance, which is pretty expensive. 1 month of Euro green card insurance for my (Canadian registered) motorcycle costs more than a year of insurance in Canada.

mr.choppers
mr.choppers
2 years ago
Reply to  eggsalad

You see a smattering of old cars on looooong expired US plates in places like Greece, but it ain’t gonna fly in Germany. Even there, I think it requires a good relationship with local law enforcement. In Corfu, there used to be a W123 300 Diesel on 1980s New York tags which always made me laugh.

Kakairo
Kakairo
2 years ago

Was there a low-end version of this generation Voyager/Caravan that used sealed beams? If so, that might be your easiest conversion.

mber
mber
2 years ago
Reply to  Kakairo

^^THIS^^
Caravan CV (the cargo model with no rear windows) had single recto sealed-beams. Find the right bezels in a boneyard and you’re home free!
Oh, wait, are sealed-beams cool with Germany?

Mabite
Mabite
2 years ago
Reply to  mber

Nope, you need to use the ones it got it’s european homologation with.

RallyDarkstrike
RallyDarkstrike
2 years ago
Reply to  mber

North American vans used different light setups that wouldn’t pass in Germany.

mber
mber
2 years ago

Gotta laugh at Europe and US states that “inspect” vehicles. Where I live, the state makes no inspection requirement whatsoever, with the exception of a bi-annual OBD-II check to make sure the emission controls are working. You can register a 1996 rusted-out crate with broken control arms, stuck brake calipers, headlights with water in them, tires as bald as Picard, and shocks that long ago gave up the ghost, and drive it all you want, perfectly legal. The only way this comes back and bites you in the butt is if you wreck somebody and their attorney can prove that your car was an unsafe death-mobile.

AndrewDaisuke
AndrewDaisuke
2 years ago
Reply to  mber

“commie liberal” Washington State doesn’t do inspections at all, and as of 2020 has zero emissions testing. It’s great!

endusone
endusone
2 years ago
Reply to  AndrewDaisuke

And meanwhile “Live Free or Die” New Hampshire has really strict vehicle inspections. Its…not great.

Anoos
Anoos
2 years ago
Reply to  endusone

NH has inspections but doesn’t require insurance or motorcycle helmets.

I love to see the Massholes experiencing some ‘murican freedom by pulling over as they cross the NH border to remove their helmets.

mber
mber
2 years ago
Reply to  AndrewDaisuke

Yup, my state is also “commie” according to the geniuses on channel 205. I guess that’s why we elected a billionaire to be our governor.

Unclewolverine
Unclewolverine
2 years ago
Reply to  AndrewDaisuke

Red as red can be kansas has zero inspections too.

Fordlover1983
Fordlover1983
2 years ago
Reply to  Unclewolverine

I’ll second that, and say that I have used it to my advantage many times!

nlpnt
nlpnt
2 years ago
Reply to  mber

Talking about inspectors not being used to things, this year Vermont moved the sticker from top center behind (from the driver’s perspective) the rearview mirror where it’s been since at least the early ’70s to the lower left of the windshield, changing size and shape in the process. There’s been some…awkward placements.

ProfPlum
ProfPlum
2 years ago
Reply to  nlpnt

NH moved and changed the stickers a few years ago too.

At least it’s better than when I moved here in the 70s — at that time they had 6 month inspections! (That changed in the early 80s IIRC.)

Anoos
Anoos
2 years ago
Reply to  mber

A few years ago an elderly couple brought their rusted-out crate to their local shop in VT for an inspection. They gave the car a new sticker.

I believe the shop owner and / or inspector were charged with homicide when the car folded in an accident like the rustbucket it was and caused a bit of death.

After seeing some of the horrifying messes allowed to roam the highways of MI, I stopped complaining about the strict inspections of my home state. I’ve also seen some questionable machinery on the inspection-free roads of FL, but at least the metal on those hadn’t rusted completely away below the beltline.

TOSSABL
TOSSABL
2 years ago
Reply to  Anoos

Years ago I complained about the triflin’ ways of Va inspectors. Then we visited my gf’s father in TN. That was a eye-opener: rusted hulks with plywood substituted for rear fender-liners, bungee cords holding hoods & trunks, padlock hasps on doors, an old 240 with a rear tire actually bouncing off the pavement ….

Given the ‘I fitzed it!’ mentality and what you see on ‘look what rolled into the shop!’ videos, I can live with our minimal inspection regime here

ProfPlum
ProfPlum
2 years ago
Reply to  Anoos

I live “next door” in NH. State inspections have fairly strict requirements for rust-through and you will fail at most stations with it. That happened many years ago now with our Alero that had enough rocker panel rust to fail, and the repair cost was higher than its worth. I also had to repair the rust on my WJ Grand Cherokee by rewelding a rocker panel and replacing the hood in order to pass.

Man With A Reliable Jeep
Man With A Reliable Jeep
2 years ago

When I saw the lead picture, I heard the Price is Right fail tune:

“Wah wah wah waaaaaah woaoooooooooh”

Yeah, I’m old.

v10omous
v10omous
2 years ago

Dumb question, but why is English the primary language on the form, and why are the inspector’s remarks in that language?

MP81
MP81
2 years ago

What a pain in the ass.

I think clearing the oxidation off the front of those headlight housings (which look quite terrible, by the way – then again…many cars running around the Detroit area might as well have borderline opaque housings) and putting those nice bulbs (which I assume are basically the Euro-equivalent of Sylvania Silverstars…since Sylvania = OSRAM) in there with the separate headlight harness should help out considerably.

And not getting an inspector who apparently will fail you for a rock chip in the paint.

98Z28
98Z28
2 years ago

The fun part of an inspection system that expects old cars to hit new car standards.

In the US, most areas are “if it meets the standards of the time of production, we are good”.

Maybe this is their way of removing cars from the road?

I have seen this in other EU nations were a car failed a modern standard, ie air bags, on a car from the 60s.

Hans the German
Hans the German
2 years ago
Reply to  98Z28

No one expects your old car to meet modern standards at the German TÜV.
Best example: Emissions. My 1973 Bmw has to meet the the emission standards of 1973. Same with everything else.

They just expect your car to be in a decent shape concerning safety topics. I have several cars and therefore have to go to the TÜV on a very regular basis and never had serious issues. But I try to keep my cars in shape, at least concerning technical aspects.

And what do you mean with your last sentence? If a car was produced without airbags, nobody cars about it as long as it was first registered close to the time it was built. The TÜV doesn’t care about it. There is simply one rule: everything that was on the car when it left the factory has to work during the safety check. And there are parts where they do not accept any minor issues. For example in the shocks and springs there cannot be any problem, or you will fail instantly. For the brakes there are also strict rules.

From my German point if view, it the way it works with the safety inspections is perfectly alright. From my point of view there have to be strict rules if you have so much individuals driving around everyday. Our roads are packed with millions of car and especially as long as you can travel with rather high speeds (it’s just the theory, in reality you often don’t exceed more than 100km/h in average on a longer drive) cars have to be in a technical good state.

By the way it’s not the TÜV that does it’s best to get old cars of the road. It’s our government which for example banned older diesels from many cities which results in people needing to buy newer cars. My 2008 bmw 525d for example cannot be used in some city’s anymore. Still i never had issues with the safety check, or just minor things that were remarked but didn’t cause my car to fail the inspection.

MaximillianMeen
MaximillianMeen
2 years ago

Oh get out of here with your commie-liberal state-mandated concern for public safety!
We Americans have God-given rights(*) to needlessly endanger those around us!

(*) In some states, these God-given rights do not apply to women, minorities, Jews, Muslims, LBGTQ+, hippies, college-educated,…

kyrinka_k9
kyrinka_k9
2 years ago

Max, nice, but generally speaking college-educated is not a good description for your asterisk. Last I checked lawyers (college-educated by default) run the country, it’s the college educated, engineers, computer scientists etc.etc. who do not have rights (sort of like Dilbert)

98Z28
98Z28
2 years ago

I wasn’t referring to Germany, I saw a UK car fail because it didn’t meet the standards of modern cars for passenger deflection if someone was hit. The car was from the 60s. It failed unless they changed the front end. Same with air bags. Must of gotten a MOT person on a bad day who hates classic cars. 🙂

I agree that a car should be safe to drive and have all parts from the year of Manufacture in working order. Meaning wipers, horn, seatbelts, brakes, steering etc. I don’t want to be hit by an unguided missile of a beater.

I spend quite a bit keeping my fleet in the best shape it can be in, address all safety issues, emissions, etc. Then I see the blue smoke rust mobile next to me that passed and I failed because a headlight clip was missing (the headlight was aligned, just didn’t have clip). I was once told “Well you drive this car and are rich so can afford to fix it. That guy is poor.” I am not rich by a long shot, I just spend my money keeping up the car vs a new 65′ TV 🙂

The only part I find odd is the headlights. If they weren’t bright from the start, is the expectation you spend hundreds of dollars on aftermarket solutions.

Hans the German
Hans the German
2 years ago
Reply to  98Z28

In Germany we tend to call the British “Inselaffen”. Don’t know what rules those crazy guys have. But thanks for answering and explains what you meant.

lost_limey
lost_limey
2 years ago

We’re not all crazy-ass island monkeys. Though it’s true that too many of us are.

That’s partly why I live in Virginia these days.

Hans the German
Hans the German
2 years ago
Reply to  lost_limey

Haha, it was more fun tbh.
I was lucky to meet very cool guys from the UK working for Bentley. Always enjoyed to work with them.

Imhereforthesecomments2
Imhereforthesecomments2
2 years ago
Reply to  98Z28

I want a 65 foot tv.

rootwyrm
rootwyrm
2 years ago
Reply to  98Z28

Ah, I see we have a case of “tell me you’re an ignorant American xenophobe who doesn’t know shit without saying that you’re an ignorant American don’t know shit.”

Hint: you’re the one who doesn’t know shit. The laws have always specifically said that a motor vehicle cannot be held to any standards other than those in force at the time of manufacture. With extremely narrow exceptions. i.e. You can’t put freshly vulcanized bias-ply radials on your 1965 BMW in the year 2022.

nlpnt
nlpnt
2 years ago
Reply to  rootwyrm

“Bias-ply radials”? Is that like jumbo shrimp?

Rich Mason
Rich Mason
2 years ago
Reply to  nlpnt

Nah, it’s more like a tuna taco.

98Z28
98Z28
2 years ago
Reply to  David Tracy

Thanks for that. It was just a comment and somehow became a complete picture of my personality based on that.

Glad to see the admins taking an active role in addressing this.

UncouthSloth
UncouthSloth
2 years ago
Reply to  rootwyrm

I see we have a case of “tell me you’re new to Autopian without saying that you’re new to Autopian”.

DT has several issues, yes, but xenophobia is not one of them. You might want to back the fuck off.

rootwyrm
rootwyrm
2 years ago
Reply to  UncouthSloth

I certainly wouldn’t describe David that way. Nor did I. Because he’s not the one making completely bogus claims about ‘OH THEY MAKE OLD CARS RETROFIT AIRBAGS!!’
That would be 98Z28.

98Z28
98Z28
2 years ago
Reply to  rootwyrm

Calm down and have some dip.

It was just a comment based on a show I watched from the UK a few years ago.

I thought this was supposed to be a site to have fun and shoot the breeze. Not jump down someone’s throat because they may have misquoted something.

This is why I left the other site. I made one comment and became a serial mass murder Trump Supporter driving drunk because I dared go against the hive mind.

Side note: I lived in Germany for awhile as well, so I am not a xenophobe.

If the admins want a social media free for all where people don’t want to make a post because people are looking for a reason to blast them, I will probably leave this one as well. I don’t have time for that in my life.

An Octopus
An Octopus
2 years ago
Reply to  98Z28

In what EU nations have you seen this? I’ve not heard about that happening in a single one.

156
0
Would love your thoughts, please comment.x
()
x