As our readers know, I spend way too much time looking at listings for vehicles that I wish I could own. In the winter, I especially love looking at classic motorcycles while my Triumph Tiger freezes outside. Great news! I’ve found a motorcycle that seems to do so much right. This 1953 Webley-Vickers combines the frame and transmission of a BMW with a 2000cc Volkswagen boxer, resulting in a beautiful machine that was its builder’s joy for five decades, and even served as a platform to help others make Volkswagen-powered BMWs.
This motorcycle has popped up at Mecum Auctions and it’s set to roll across the Las Vegas auction block on January 26. At first, I fell deeply in love with this creation because it’s about everything that I’d want in a vintage cruiser. It’s painted in a gorgeous color, is draped in plenty of brightwork, and even has some practical cases. That’s just the beginning of it, as the frame comes from a BMW while housed under the tank is a 2000cc air-cooled Volkswagen engine. It looks like a Harley-Davidson but could be repaired with zip ties and a hammer.
According to the listing, this is the work of California resident Doug Whitson. A motorcycle fanatic, Whitson purchased the tooling and parts from a developer of Volkswagen-powered motorcycles named Rodger Willis. Whitson took what he purchased and opened a business centered around selling Volkswagen-powered motorcycles and kits to convert motorcycles to VW power. His own motorcycle–the one on sale here–was built in the 1970s and was named the Webley-Vickers. When Whitson titled the custom creation, he decided to give it a model year matching his birth year, 1953. Listen to this thing purr:
I had so many questions, the first being “why?” Why does someone swap a BMW boxer for a VW boxer? And what’s the history of Whitson’s venture? I have spent several hours combing through the internet and encountering dead end after dead end. It’s not often that I find nothing tangible about a company, but here we are. It seems that older motorcycle enthusiasts know what these are, but no major site has detailed them before. The Mecum listing says to visit the “VBMW Motorcycles” Facebook page for more information, but such a page does not exist. It’s sort of amazing how little is out there.
Through further drilling, I did land on the page that the Mecum listing appears to be suggesting, and it’s called “VW Motercycles.” On the page is a nearly eight-year-old article detailing why people swap BMW engines for Volkswagen engines, and Whitson’s involvement in it. Back then, Whitson himself commented to say that the story does an amazing job documenting the era, and the article sources builders from the day. Most recently in 2020, Whitson was praised by V8 motorcycle builder Boss Hoss for taking one of the company’s chunky bikes 3,000 miles down highwayPeeeeeeeees in Alaska.
VW Motercycles, a page run by a builder of VW-converted motorcycles for fans of conversions, presents this as an explanation for why you might want to power a motorcycle with a Volkswagen engine:
There are a few good reasons why one would attempt to build and own a VW-powered motorcycle. For the builder, a unique challenge to build something different with all the “fun” of overcoming the various barriers that come with a project like this. From sourcing the components, designing the bike, figuring out the mechanical solutions and putting it all together. The thrill of the first time it starts and runs down the street is a memorable event. Owning one and driving it is very enjoyable due to the fact again, it is a very unique bike that arouses all kinds of interest and questions from those who see it.
The beauty of the VW-powered motorcycle is the fact that the VW engine is a very reliable, very powerful low revving engine with a lot of torque. Parts are cheap, it is low tech and so easy to maintain. Unlike a bike today that cost a fortune to service (forget about fixing some electrical problem on the road), it never breaks! It is incredibly smooth, idles flawlessly and when you grab the throttle at highway speeds, accelerates like it is being drawn down the road by a tremendous magnetic field!
[Editor’s Note: That custom dual-port intake manifold runner there is making me swoon. – JT]
Searching through various motorcyclist forums, it seems that one motivation to put a Volkswagen engine in a motorcycle is similar to why the Brazilian AME Amazonas 1600 exists. A Volkswagen Beetle engine was cheap and crazy reliable when a Harley-Davidson engine of the era might have broken down on you. Our Jason Torchinsky wrote about the Brazilian bike before and explains that the country may have also been motivated to build VW-powered motorcycles due to the lack of large motorcycles for police use.
Back to America, VW Motercycles says that the vast majority of Volkswagen-powered motorcycles started their lives as BMWs, often R60/2s from 1960 to 1969. More searching reveals anecdotes from motorcyclists claiming that they’ve seen or worked VW-converted BMWs in the 1960s and 1970s. VW Motercycles goes on to note that BMW was a popular choice because the motorcycle manufacturer already used boxer engines, making a Beetle’s engine a natural fit, and an aesthetically-pleasing one at that. The page writes that other companies that used horizontally-opposed engines like Ural and Dnepr also gave up their frames to Volkswagen engines. Of course, since we’re talking about a custom motorcycle here, really any motorcycle could give its frame up to fit a Beetle engine.
Listen to a Ural converted with a VW engine:
The creator of the Facebook page then gives an overview on how to build a Volkswagen-powered BMW, explaining that the BMW’s frame needs to be cut in half and then lengthened or widened to house the VW powerplant. Then to mount the engine, custom motor mounts need to be welded in.
VW Motercycles explains that the next step is to connect the Beetle engine to the existing BMW transmission, and that is done through a custom bellhousing. Doug Whitson is credited for designing a bellhousing that not only does the job, but allows you to install an electric starter. That way, you aren’t left trying to kick a VW engine into life using a BMW kick starter.
The page notes that you still won’t be done yet, as the original BMW clutch needs to be modified so that it doesn’t slip under VW power, and the transmission itself needs to be regeared. As the page explains, using the original gearing would result in a low top speed as the transmission was made for the higher-revving BMW engine. The regearing caused fitment issues, so then you needed to relocate the input shaft, which required welding and machining. From there, apparently, things get easier as you mount on a generator, a carburetor, and an exhaust.
Apparently, a number of people in the 1960s were involved in cranking out VW conversion parts and kits. One of those people was Rodger Willis, who is said to have originally worked with Jack’s BMW to build complete converted motorcycles and kits. Eventually, because of an alleged dispute, Willis ended up with the tooling and the rights. Willis then continued making those motorcycles and kits before passing them on to Whitson, who continued to do the same until about 2018. Whitson’s parts included the aforementioned transmission regearing process, but he improved it with computer-aided design and manufacturing software. Whitson also supplied an aluminum billet bellhousing with an electric starter, exhaust manifolds, a generator mount, a clutch button, an oil-filled intake manifold to keep the carb from icing, and more.
[Editor’s note: That’s a real VW taillight there! What a nice touch. It seems to be doing duty as a license plate lamp, too, making me wonder if it’s possibly a cut-down 1954-1955 Heart Taillight with the heart lens area repurposed to be the license plate light opening? – JT]
The page says that Whitson and Willis were hardly the only players, as a number of others got involved in making these motorcycles. It’s sort of wild that there’s not much written anywhere about this, and the only source is one written by another enthusiast and builder of VW-converted motorcycles.
Whitson’s Webley-Vickers is a testament to how good these conversions can be. According to the Mecum listing, Whitson rode it from California to Sturgis, South Dakota many times. Housed where the BMW mill would normally be is a 2000cc Volkswagen engine. It’s making an unspecified amount of power and is fed from dual S&S carburetors. The listing reports that the other conversion parts include the parts that Whitson sold for kits like the intake and exhaust manifolds. Apparently, Whitson enjoyed this motorcycle from the 1970s all the way until 2018, when he sold it to a dealership. The odometer shows 24,668 miles, but it’s unclear how many of those were pre-conversion. Sadly, engine output and which BMW gave up its frame for this isn’t known.
What is for sure is that this is a wild one-off from a time when at least some motorcycle enthusiasts saw air-cooled VW engines as viable power for motorcycles, and this is a gorgeous example. It’s set to roll across the auction block on January 26. I’ve reached out to Doug Whitson to see if he could give me any more information. If you know anything about this period of Volkswagen-powered motorcycles, drop me a line at mercedes@theautopian.com. I’d love to know more about this niche!
The Yamaha Moko Powa D10 Is A Futuristic Motorcycle From A Company That Disappeared Without A Trace
What It Was Like Visiting The Birthplace Of The ‘Cafe Racer’ Motorcycle — London’s Ace Cafe
Bimota’s New Café Racer Has A Design That Will Break Your Brain With Every Angle
Got a hot tip? Send it to us here. Or check out the stories on our homepage.
Support our mission of championing car culture by becoming an Official Autopian Member.
Twice the complexity of a BMW airhead, but with more weight and the same horsepower!
What’s not to like?
I guess I get it if you want more juice out of your /2. I have an R60/2 and it’s like 29hp on a good day. But you can buy an airhead for less than a /2 by a mile these days and it has the same power as these VW things with actual brakes and a hundred pounds less weight.
The Amazonas have been around since I was a kid, but even back then, I couldn’t figure out why you’d do this. When I was 17, I had a VW Bug and my dad had a BMW airhead and it seemed to me that putting those two things together was the answer to a question nobody had ever asked.
The uncertainty about the power output made me wonder, how on earth do you put a bike on a dyno? Do they have a frame or something to keep them upright?
Eyes the Super. This is a heck of a rabbit hole.
It looks like a Harley-Davidson but could be repaired with zip ties and a hammer.
So, no different from its contemporary (and later) Harleys!
(Full disclosure – I once repaired a Moto Guzzi distributor with a zip tie, no hammer needed. It was still in place a couple years later when my buddy sold the Guzzi.)
I was hoping it would make that chirping sound like a 60’s beetle with the pea shooter exhaust tips
Thanks Mercedes, that was a fascinating read and some good research. I am sure leaving the BMW twin in place leaves you with a better bike, but symmetry if you will of going from an opposed twin to an opposed four makes for a neat machine, and the VW trim and lights are a great touch.
Those crazy French built a few Citroën GS 4 and Visa twin powered motorcycles in the 70s, mostly because escorting the president on German motorcycles felt wrong
https://www.citroenet.org.uk/miscellaneous/bfg/bfg.htm
I also recall some VW powered BMW sidecar rigs from the era when the biggest BMW twin was 600cc but as soon as the R90 and R100 appeared people stuck those in their /2 side hacks instead.
I saw one of these conversions at a BMW rally a few years ago. The rear exhaust port on these is brutal – it’s basically a hard 90* within an inch of the head. That would definitely negate any flow advantage from that intake.
I don’t think you should ever replace a BMW motorcycle engine, because they’re just sooo good, unless maybe it’s one of the old horsepower lacking single cylinder ones.
On URAL or Dnepr or Chiang Jiang BMW rip-off motorcycles, it makes totally sense, because the engines on those are crap, but the rest is pretty rugged and solid. So go ahead on on of these!
And I know what I’m talking about, having owned an URAL for fun besides my 1977 BMW motorcycle.
I have a spare 1300cc VW engine in the workshop and my very cool 1969 MZ Trophy really won’t seem to start no matter what I do, so maybe…
I think you stumbled onto the line of thinking that led to these conversions….1. Busted bike, 2. VW engine lying around, 3. Why not?
I’d go back to the Gen One Goldwing I had.
The bike featured looks pretty well done, but no thanks. As a rider of an old BMW airhead (1980 R100), I cannot imagine why anyone would ever do this. All it does is make the bike heavier, slower and uglier. The BMW boxer twin is a GREAT motor in most iterations, with ample torque and great reliability. Why mess with a great thing?
My thoughts exactly, BMW is light with many horsepower, VW is heavy with few..
But the low compression and high cylinder volume maybe makes it handle more like an old Harley. But why not just buy one of those then?
Gottdang, that thing’s got a bigger VW engine than my VW!
(Also, I gotta ask as someone that laughs at peepee jokes. What’s a “highwayPeeeeeeeees?”)
That one is especially pretty with the attention to detail, I really don’t know how much was gained when it was all said and done though.
There were also a few custom Corvair powered bikes in the 1960’s and ’70’s some of them must still exist somewhere. Probably in a garage corner or in a barn and long forgotten.
Interesting. I still have the hots for a Munch Mammut, though. Would live to find one, shine it up, and name it “Floyd.”
To srosslx1986: I believe the Von Dutch bike that the “American Pickers” guy was so hot for was a Harley with a VW engine grafted on. A photographer I worked with, who had shot some photos for motorcycle magazines in earlier days, said it was, anyway.
If you remember Mike Wolfe on American pickers bought a Von Dutch VW powered BMW. This one looks a lot cleaner though.
Please someone make a VW Beetle powered by a BMW motorcycle engine, or provide a link to one!!!!
All I got is a BMW-powered 2CV: https://www.youtube.com/watch?v=o1E3uVNbAas
Better yet, a twin-BMW-engined, AWD Beetle. Internet, make it happen!!!
Dude, I was thinking the same thing. I always thought this would be awesome. The 1000cc airhead on my old BMW puts out 80ish horsepower and is significantly lighter than any old VW motor. I’m sure there would be some work to make sure it was getting adequate cooling, but should be more than doable.
How about a BMW 700 coupe? Although you’d want to swap the 600cc /2 engine for a 1000cc R100
I remember reading about the Amazonas back when I was a rider in my youth. Yes, the bike was created to fill the need for domestically produced big bikes for police use. The choice of using the VW engine was driven by the fact that they were cheap and plentiful, due to the fact that VW started building cars in Brazil in 1953.
That looks like a well-engineered swap. And hey, at least it’s not a trike.
Oof, cringing at that Ural conversion running with no exhaust… exhaust valves are going to have a short life!
On a URAL everything in the engine usually has a short life, so..
If you’re ever in Atlanta, check out Blue Moon Cycles, John Landstrom’s (the seller) place. I haven’t been in forever, but it was full of cool vintage bikes.
https://www.bluemooncycle.com/our-showroom/