If you’re having a tough time finding a gift for the Chrysler fan in your life, I may have found just the thing to get them. Back in 1993, attendees of the Detroit Auto Show got to see a proposal for a luxurious touring sedan. The 1993 Chrysler 300 concept was built with goodies added on by American Sunroof Company and included a full glass roof and Italian leather. It cost $145,000 to build but today you can get it for just $35,000.
This listing popped up on my feed this morning and I was stunned by what I was looking at. It looked like someone crashed their Chrysler New Yorker through a Pep Boys, coming out of the other side with shiny custom headlights and a new grille. But the headline of the listing said it was a prototype, and it’s a Chrysler 300 to boot. Wait, what? I clicked in to see what was going on.
To explain my confusion, we have to flip back through several pages in our calendars. In two archived documents, Chrysler marks the start of its famed 300 in 1955. This first 300 (known internally as the C-300) got its name from the 331 cubic inch V8 under the hood that made 300 gross horsepower. Chrysler claimed this car to be America’s most powerful production car, and it set a record at Daytona after it hit 127.580 mph, or 7 mph faster than the nearest non-Chrysler. And this car wasn’t just fast, as it also came with a sport-tuned suspension and a leather interior.
Chrysler goes on to note that given its $4,109 price (more expensive than the day’s $3,069 Corvette), it was nicknamed “The Banker’s Hotrod.” And these cars lived up to that nickname, too, as they found success on NASCAR circuits.
The next year, Chrysler would introduce the first of the “Letter Series” with the 300B. Chrysler says a notable feature of the 1956 was an available three-speed manual transmission, which wasn’t available in the first 300. However, apparently, most buyers opted for the three-speed TorqueFlite automatic. That makes sense, given the luxury ambitions of the 300B. Chrysler would continue production of lettered 300 cars until 1965. By that time, Chrysler says, the raw power of the 300 Letter Series cars no longer had as much emphasis as the automaker had other performance vehicles to offer.
At the same time, the automaker notes, it was also selling non-letter 300s. Between 1962 and 1971, the 300 Sport Series offered buyers a more affordable sport and luxury experience to the then-exclusive 300 Letter Series cars. In 1970, a performance model returned with the 300 Hurst. While not a letter car, it paired a leather interior with a 440 cubic inch V8 making 375 HP. And it was fairly exclusive as it was limited to a run of just 485 units.
The 300 name would return again in 1979 in the Chrysler Cordoba as the “300 Special Edition” performance trim. Then Chrysler went a whole 20 years without a 300 until the 300M made its appearance in 1999. And of course, the 300 has survived into the present day, most recently evolving into the 300C.
So, what’s going on with this 1993 concept car getting the 300 name? I searched Stellantis articles on 300 history and not a single one of them mentions this creation.
Documents provided with the car indicate that its modifications came from the American Sunroof Company (a firm that’s taken part in great cars like the Buick GNX) under the headline of “Complete Development Capabilities.” It appears to have started life as a Chrysler LHS or New Yorker before getting outfitted into a luxury cruiser by ASC. Manufacturer-style photos like the one near the top of this post also come with the car in the sale.
[Editor’s Note: I just want to communicate how important this car and its siblings on the LH Platform were at the time. These were the Chrysler “cab-forward” cars, with transverse [Edit: They’re not transverse. They’re longitudinal front-drive! How did I not know this?!] front-engines and a “cab forward” design that yielded lots of interior space. Allpar describes what that means, writing:
In short, Chrysler managed to enlarge the cabin by making it move toward the car’s two other compartments, mostly the engine’s. As if improved habitability wasn’t enough, these models’ appearance represented a big change compared to their predecessors because every proportion was different and they already featured 1990s visual trends such as wedge-shaped front, smooth sheetmetal, less chrome trim and tall rear. While their sales weren’t earth-shattering, they did greatly recover their maker’s image.
Quality was higher than usual for Chrysler, and overall, the vehicles were state-of-the art in the way they were developed and manufactured. As Allpar puts it:
The LH cars were the first Chrysler vehicles to be built using cross-functional teams, benchmarking of best-in-class cars for each attribute, and early factory, worker, and supplier involvement. In 1992, Chrysler Corporation wanted the world to know how much the company had changed.
This 300 concept here is a variation of the first model year of the LH platform (like Mercedes said, an LHS or New Yorker), a platform that welcomed its own 300, the 300M, but that came out six years after this concept car (in 1999). The point is: 1993 was a huge deal for this platform, and this particular concept was probably mind-blowing back in 1993. Oh how far it has fallen. -DT]
The headlining feature for the concept, I think, is the front glass sunroof and rear moonroof. The expansive glass roof features a motorized sunshade. You can see the roof open in the profile shot near the top.
ASC also added more with a unique front bumper, projector headlights, touring suspension, a unique grille, special cladding, taillights, wheels, and more. And the interior was finished in Italian leather.
Power comes from a 3.5-liter V6, which in LH platform cars made 215 HP sent to the front wheels through an automatic transmission. The finished car was named the 300 and the seller claims that $145,000 was spent on bringing it to life.
What’s unclear is if this is something that Chrysler teamed up with ASC to build, or if it’s just a one-off by ASC to show off its skills. A hint comes from the Detroit Free Press, which reported that ASC rolled into the 1993 Detroit Auto Show with a variety of concept vehicles, including this Chrysler 300 along with a GMC Sonoma with a targa roof and a touring edition of a Ford Crown Victoria.
I reached out to Stellantis asking if Chrysler was involved, and thus far, a representative has told me that it could be a prototype, but they are looking into this question. I will update if the information changes.
Apparently, the car’s had some sort of life after being a show car. It showed up for sale in 2010 at the Volo Auto Museum in Volo, Illinois with 330 miles on its odometer and a price of $25,998. It was still for sale at the museum in 2014 and 2015 for $21,998. Today, it’s for sale in Minot, North Dakota with 1,000 miles on the odometer. This time, it’s offered by dealer Pro Market Connections. Disappointingly, the photos provided for the current ad are the 12-year-old photos that Volo provided when it sold the car. I can’t imagine the car’s condition has changed much over the course of 12 years and just 670 miles, but I’m still curious.
But if you’re the kind of person who wants to own a concept car so obscure that there’s not much documented history on it, the price is $35,000. Is it worth that much? I’m not sure. But you’ll get to say that you own a concept car!
Support our mission of championing car culture by becoming an Official Autopian Member.
• The 2023 Chrysler 300C Is A Reborn SRT8
• No Amount Of Money Is Too Much Money For This Vanilla-Pudding Chrysler Crossfire
No interest due to the Italian Leather. If it had fine Corinthian Leather, you’d have my attention.
Corinth is famous for its leather!
That looks like an A32 Maxima that had a baby with a Lincoln Town Car and an Oldsmobile Cutlass Ciera. It looks pretty good though.
I love Chrysler vehicles. I have a 2003 Chrysler voyager with a 2.5 Mercedes diesel. Manual transmission 5 speed. Toughest van I have ever owned. The best fuel mileage we ever got was 41.
no thanks, I would take an LHS over this or even the 300M all day long. Now if it were the Thunderbolt from that year, deal is off, I would take that hands down.
Holy cow! This was one of my first projects when I moved to Detroit to work for ASC. I designed and patented the retracting sunshade system. It was a bit novel in that it had strips of spring steel in the headliner. It allowed the shade to take the crown of the roof, as it deployed from the rear header.
The project was not commissioned or funded by Chrysler. ASC had the practice of building such show cars as a means of showing capability as a supplier.
Mike Alexander (of Alexander Brothers fame) led the ASC Technical Center and Chris Ito led the design studio at the time. It was a fantastic place to work at the time, under such incredible leadership.
Another reason I love this site: actual experience from someone involved in an obscure car featured in an article here.
Thanks, Kipewing
Tell us more.
Autopian team, you need to pick this guys brain for a series of articles on everything ASC that he worked on. Or have him write them. Assuming, of course that Kipewing is willing.
Funny enough, this has (thus far) stumped the Chrysler people. Apparently, there are multiple reps looking for the answer. Thank you so much for the extra context and confirmation! I had a feeling that this was an ASC thing considering the reports that ASC had its own display.
I love this community!
Loads of amazing work came out of that studio, in that era.
We also did the Bentley Silverstone. The cars themselves were built by Metalcrafters.
http://www.bentleyspotting.com/2009/01/bentley-silverstone.html
If I wanted an LH with some glued on crap I’d check Facebook Marketplace.
A 1,000 mile, one off, of a largely forgotten near-luxury car that was firmly average but not exemplary for its time. And missing its headlight trim. For $35k. Good luck with that one.
And it is probably easier to get headlight trim for a Yugo than it is for those random 90s aftermarket headlights.
Uh, David? The engine on the LHs was longitudinal, like an Audi, not transverse.
The asymmetry of the headlights is actually pretty forward looking. I see lots of 20 year old LS cars now with right/left mismatch of panels, wheels and trim.
The sporty LHS has the floor shifter. The more luxury-oriented New Yorker has a column shifter and front bench seat
And of course something is broken on it because Chrysler LOL of course some trim around the headlights would be missing.
They look like off-the-shelf Hella projectors or something
Is it bad that I kinda want a New Yorker? They look so damn comfy.
My mom had an LHS of this vintage when I got my license. I loved that car. Massive inside, comfy AF, and the V6 provided some good punch. Not bad looking at all, either. I always thought it was weird how they hung the engine longitudinally over the front axle, Audi style. Only issue we ever had with it was I kept blowing the Infinity speakers.
There was a New Yorker and an Intrepid ES in my family and I loved them both. That 3.5 V6 remains one of my favorite engines.
I thought the same thing about the headlight trim, but that’s a polished chrome finish around the projector beams. Because of the angle from which the photo was taken, it’s reflecting the dark background behind the photographer … but looks like it’s missing.
It’s weird that they took the fairly distinctive front end of the LHS and made it look like a first-gen Kia Sephia.
I don’t see Kia. I see a mish-mash of bathtub Caprice and late ’90s to early aughts Cadillac.
I see some Nissan Altima\Sentra
For 35 grand I think I’d rather look for a nice 300C SRT8.
I would give this at least an 85% chance of being a Chrysler contracted prototype. Maybe 90%. You have to understand a bit of the history before the LH cars, which is why I peg it so high.
Chrysler had a very, VERY deep and ongoing relationship with ASC starting in the early 80’s. ASC did the engineering for the Daytona T-Tops. ASC did the engineering and ODMing for their sunroofs. ASC was contracted to design and produce certain exterior accessories and interior components. ASC helped with the LeBaron convertible. Ford EXP? That was them. Saab 900 convertible? Yep. And ASC was specifically contracted to do the 300C Helios convertible concept.
So could Chrysler have contracted them to do some LH 300 concept work? Absolutely. They did it before, no reason to think they wouldn’t have done it again. Did they?
Honestly, I would say there is basically no possibility of us ever getting a definitive answer. Untold reams of documents were destroyed during the Dumber-Chrysler years, ASC sold the concepts and development division to Roush in 2016, and basically closed up the OEM/ODM operations for good in 2017.
Yeah, I feel like most Chryslers in the 90s didn’t debut with moonroofs immediately on intro or press materials made it a point to say that the option was built by ASC.
Being at the 1993 NAIAS, early in the year, this concept had to also be a preview of the upcoming LHS & New Yorker, which trailed the other models by a model year, as much as it was to show off ASC. Further – to gauge reaction for a ‘sporty’ Chrysler sedan again. At that point, moreso than Dodge/Plymouth, the Chrysler brand specifically was still deep into wire wheels, landau roofs, button leather seating etc. – the Concorde was the first break from that. Even if the market had been quickly shifting away from that, they didn’t want to upset the existing customer base.
The Dodge Stealth didn’t get a convertible hard top did it?
I know the Mitsubishi 3000GT VR-4 Spyder was done by ASC.
My recollection is that, at the time, insiders would joke that “LH” stood for “Last Hope.” Speaks to where Chrysler was in the early 90’s.
That’s Chrysler’s MO though, right? Make a platform, milk it to death, almost go under, repeat
We has an LHS New Yorker for a few years. The headlights were objectively horrible. Couldn’t see squat at night. The transmission was tolerable, until it started loosing (expensive) fluid. The water pump required discharging the A/C system so you could remove the evaporator to replace the water pump.
OTOH, the fuel economy was middling decent and the back seat was NBA sprawling big (they had to sprawl, the headroom didn’t match the foot room and the bench was a bit low). The front seat held you up in front of the wheel, but that’s all I remember of it. It deprecated as fast as a BMW and parts were nearly expensive. My wife loved it.
We referred to the LHS as the Large Heavy Sedan
The headlights are ok, the wheels are ugly, but this is still a really pretty car otherwise. Such a timeless design. They were incredibly nice inside too, front and rear. Shame Chrysler didn’t try to run it more upmarket.
Their transmission didn’t help either.
Bigger question, how tf did it end up in Minot?
That said, I do like the look of this, as with all the other longitudinal FWD Pentastars. My favorite real one would have to be the 300M, though its preceding Eagle Vision counterparts were cool, too.
This is why badge engineering has been a successful strategy. Of the LH cars, you like the 300M, and I liked the Eagle Vision best. Years ago my brother-in-law was offered his choice as a company car, and he picked the Dodge.
(And if Toyota offered a different take on the RAV4, I’d definitely be looking at that instead of the “angry mechanical catfish” grille they currently sell.)
I remember seeing the Vision overseas as the Chrysler Vision.
Right, these were longitudinal, not transverse, which makes the excellent packaging/space efficiency even more commendable. The layout carried over from the Eagle/Renault Premier that Chrysler used as a starting point for the design, and was supposed to allow for easy conversion to RWD later on, if needed (Chrysler wanted to take a piece of the police car market back from GM & Ford and thought they’d need a rear drive variant to compete effectively, but the idea never went anywhere and they marketed FWD Dodge Intrepid patrol cars instead)
I’d never realized these (or the Premier) had longitudinal engines, weird.
Yeah, and the 2005 300/Magnum originally started out as a rebody of the LH, finally using the RWD/AWD conversion ability, until Daimler management had it reengineered to use the E-Class architecture to better demonstrate synergy between the two halves of the company. I believe the resulting LX still carried over the LH’s cowl structure and some other under-body structural elements
I thought they were using bits from the Eagle Premier and it became the LH, then yeah, some voodoo to become the LX. I really wondered if what became the Sebring/Avenger would have been better if DCX followed through on sharing the platform with the C Class.
I just need to reiterate this point for those who were unaware:
“The layout carried over from the Eagle/Renault Premier that Chrysler used as a starting point for the design…”
The LH cars were based on an AMC-engineered vehicle. I just feel that, as Autopians, we need to always remember just how scrappy, innovative and enduring AMC was despite having such limited resources.
Ha! A decade ago that would have been my first reaction too, but having just moved from Minot this summer I’m not surprised something like this found its way there. There’s a surprising amount of money in the community, particularly businesses who’ve done well with the Bakken oil boom as well as some large farming operations, among others. Hell, almost every day I saw one newer Lamborghini being driven during the warmer months the past couple of years. As a Mopar enthusiast myself I can think of a few people I’ve met who could well be the owner.
You are so right about the flow of new money into western ND. Check out Williston from the 90, it’s a sea of brand-new extended-stay hotels and restaurants. Explosive growth over the last two decades.
But it’s a boom, and we know what happens to booms.